Pay in installments of $7.33 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 11 - Sep 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
fairfield barbershop pedal Fairfield Circuitry Modele B Overdrive – STOMPBOX SUPPLYUsed, but good condition. No original box. From the manufacturer: For everyone out there who nevers turns off their Barbershop, this is for you. The same circuit in a tiny box, no bypass switch, no light. You can select between two tone options via a jumper inside the pedal: flat and wide, like the original Barbershop, like the middle tone position of the Millenium Edition light, high frequency cut, like the right tone position of the Millenium
Used, but good condition. No original box.
From the manufacturer:
For everyone out there who nevers turns off their Barbershop, this is for you. The same circuit in a tiny box, no bypass switch, no light. You can select between two tone options via a jumper inside the pedal:
- flat and wide, like the original Barbershop, like the middle tone position of the Millenium Edition
- light, high frequency cut, like the right tone position of the Millenium Edition
Always on, never off, this is serious.
Have you ever sat in a barber’s chair wishing your tone was as slick as your freshly shaved upper lip? With the Model B Barbershop Over- drive on your pedalboard, you could keep your Van Dyke and sound good doing it.
A stripped-down, minimalistic version of our popular Barbershop Overdrive, the Model B has no bypass switch; it’s always on. Hand- made from JFETs matched to specs, this versatile pedal will treat your pickups with the respect they deserve. In return, they’ll thank you with some of them sweet tones.
SAG
The Sag control reduces the voltage to the amplifiers as you turn it counter clockwise, giving additional control over the character and feel of the saturation. The lower the Sag, the browner the sound. Full voltage is applied when the control is set fully clockwise. It is at this setting that the pedal has the potential to be its cleanest and loudest.
DRIVE
Sets the interstage gain of the amplifiers. More gain means more distortion. The wide op- erating range allows you to go from an almost clean gain to a tasty rich overdrive.
TONE
A plastic shorting jumper on
a 3-pin header labeled HIGHS inside the enclosure allows to activate a low-pass filter. With the jumper placed at the YES position (rightmost 2 pins, if the audio jacks are positioned at the top of the pedal), there is no cut, like the classic Barbershop of days passed. At the CUT position (leftmost 2pins), a subtle filter to tame ever so slightly the feeling of brightness accompanied with the Barbershop.
VOLUME
Controls the output volume of the pedal while keeping the effect unchanged. This is where you have plenty of room to boost.
NOTES ON POWERING
The Model B Barbershop was designed to operate using your typical centre negative, regulated 9-9.6 VDC power supply. The pedal is protected against reversed polarity. The pedal will function with voltages up to 18 VDC but the character of pedal will drastically change. The higher the voltage, the less drive you will have. Always check your power supply for proper voltage and polarity before con- necting. There is no battery connection inside the pedal.
WATCH THE VOLUME
It’s best to start with the Volume control at a minimal setting to avoid damage to your ears and equipment.
FIND THE SWEET SPOT
There are combinations of settings that will put your setup right on the edge of breaking up, allowing you to go from clean to saturated with only variations in playing dynamics.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy